You decided you wanted to tint your vehicle, you ordered the tint, and you've either installed it yourself or had an installer handle it for you. Now, your tint is peeling, bubbling, or faded. In this blog we explain why this...
Want to change up the look of your tint this show season or turning in your lease? Removing LightWrap is simple, and when done correctly won't damage your vehicle's lights or chrome.
In this blog we will demonstrate the steps of applying a Luxe Wet Application Vinyl Hood Bulge Decal on a Charger, but you can follow the same process when applying any wet application vinyl decal to any hood bulge!
You have a hood decal but you're ready for a change! In this blog we walk through the simple process of removing a vinyl hood decal.
Today we had the chance to install a custom vinyl decal for some local customers! In this blog we will demonstrate the steps of applying a Wet Application Decal on a 2008 Chevrolet Dually Duramax, but you can follow the same...
I purchased the Dark Smoke Metal two years ago and did a DIY install. It lasted a year before a bubble appeared about the size of a dime. It lasted another year before it expanded to a quarter size and tore open. I purchased a yard, hoping to replace just the half where the film had torn. I found that the existing film had faded, from two years, more than I expected. My Redeye is garage kept and I put maybe 2,000 miles a year on it going to car shows. Not much exposure to the elements. When I applied the new yard of film it seemed to allow more light through it in the direct sunlight. When in the sun I could see "through" the film more easily than the older tint. I had to tear it all off and order another 2 yards. This time I had a professional installer install the product. My DIY project included a single piece applied across the center light panel, then two individual piece on the outer lights. This took me 8 hours. The Luxe video only demos the easiest part of applying this film to the taillight. I challenge Luxe to providing a video showing the install for the much more complex center panel and using the thicker film like the smoke metal. Not as easy as a standard film and requires a lot of patience. A lot of patience and well.....a lot of patience. Still, money and time aside. I love the end result!!
I love the product, been a big fan for years and recommend it to anyone who asks. I also tell them that if they want to do what I have done to my Challenger with a single piece across the entire center section, that they are going to have to expect it to only last two years. A $140 investment every two years plus install ($250+) is something most people seem to shy away from here..... Better for me, it makes my car stand out. I would encourage Luxe to stay on top of the quality control. If this film needs to be replaced more often it would not be worth the money.
I cannot speak highly enough of Luxe Auto Concepts and their phenomenal products. As a complete novice in the world of car modifications, I approached their installation process with trepidation. However, from the moment I opened the package, it was evident that Luxe Auto Concepts had gone above and beyond to ensure a seamless experience for their customers.
Despite my lack of experience, I was able to navigate the installation with ease, completing it in under 30 minutes. What truly impressed me was the meticulous attention to detail in the product design. Each piece fit flawlessly, and the instructions provided were clear and concise, guiding me effortlessly through the process.
What truly sets Luxe Auto Concepts apart, however, is their unparalleled customer service. Throughout the installation, I encountered a few minor hiccups, but their team was readily available to provide assistance and guidance every step of the way. Their patience and dedication to ensuring customer satisfaction are truly commendable.
In addition to the exceptional product quality and customer service, Luxe Auto Concepts provides everything you need for a successful installation. From the comprehensive kit to the invaluable support, they leave no stone unturned in ensuring a truly premium experience for their customers.
Without a doubt, Luxe Auto Concepts has set the bar high for excellence in the automotive industry. I am not only thrilled with the outcome of my installation but also deeply impressed by the professionalism and dedication of the Luxe Auto Concepts team. I wholeheartedly recommend their products to anyone seeking superior quality, impeccable craftsmanship, and unparalleled customer service. Luxe Auto Concepts has earned a lifelong customer in me, and I will proudly sing their praises to anyone who will listen.
Light smoke headlight tint from Luxe is leaps and bounds the best I’ve ever seen. Dry application is wonderful and its air release is of the highest quality. Zero air bubbles! I added vinyl to the headlight before applying to create an embossed look. If I had a single complaint I would say I wish there was 20% more film provided. The light shines completely through the light smoke and creates a more sinister look to my headlights.
Luxe Forged Carbon Vinyl - Chopped Style
Great quality, perfect fitment
I installed the Charger tail light tint which is very easy and makes my car look better.
easy use and install. looks great
Easy to go on, Fitts perfect and delivered early.
Went on smooth and almost look like they aren't there. I dig it.
Looks fantastic. Very happy with it. Centering it up is simple with the point from the decal. Lining it up with your taillamp takes a little work. Would like to see that somehow simplified as well.
Looks very natural; unlike some yellows that are pretty harsh. Installer said it was easy to work with!
Awesome product..it stick properly
Excellent job
Received quick an very easy to install
Looks pretty darn awesome.
Material was easy to work with
